BF460A/CX/W C-3-8 Base VAD
The BF460A/CX/W Addressable Base VAD utilises the latest advances in sounder and LED technology to provide a truly exceptional twin-LED C-3-8 base-mounting fire alarm warning device. Designed for use as part of a stacked VAD/detector base combination, it is fully compatible with C-TEC’s ZFP & XFP range of Apollo XP95/Discovery addressable fire panels. Able to provide EN54-23 illumination levels at typical BS5839-1 detector spacing intervals*, it has an alarm current of just 10mA making it one of the most efficient base VADs on the market. If not used as part of a VAD/detector/base combination, optional white and red caps are available for standalone use. * Assumes ambient light is 201-300 lux and VAD viewing angle is direct.
Third-party certified to EN54-23 (VADs) and 17 (Isolators) by the LPCB. Provides 'C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area*). Two unique C-TEC designed lenses maximise light output whilst minimising current draw. Onboard short-circuit loop isolator. 550uA quiescent current. 10mA alarm current @24V DC. Attractively finished in white and clear polycarbonate (light output is white). Group addressing facility allows multiple devices to be operated simultaneously. 7 selectable volume levels and up to 15 selectable tone pairs. Attractive compact design - just 112mm diameter, 46mm deep (not including detector). Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use. IP21C rated. Low current consumption means multiple devices can be connected to the loop. DIP switch addressed. Detector spur wires included. Large cable entry hole located away from fixing points facilitates straightforward installation